Re: Retrouver la table des partitions

Page principale

Répondre à ce message
Auteur: Alain
Date:  
À: Olivier Allard-Jacquin, guilde
Sujet: Re: Retrouver la table des partitions

Bonjour,
voici le retour de la commande, je me perd dans le résultat; si je peux
avoir un petit coup de main pour éclaicir tout ça, merci.




Le lundi 22 mars 2021 à 20:58 +0100, Olivier Allard-Jacquin a écrit :
(...)

>     Que donne un :
> smartctrl -a /dev/sda

>

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-66-lowlatency] (local
build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke,
www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     GJN 120GB
Serial Number:    Q1102A00000000000869
LU WWN Device Id: 0 000000 000000000
Firmware Version: Q0927A
User Capacity:    120 034 123 776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P
showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Mar 24 19:22:19 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers
missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection
activity
                    was never started.
                    Auto Offline Data Collection:
Disabled.
Self-test execution status:      (   0)    The previous self-test routine
completed
                    without error or no self-test
has ever 
                    been run.
Total time to complete Offline 
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x11) SMART execute Offline
immediate.
                    No Auto Offline data collection
support.
                    Suspend Offline collection upon
new
                    command.
                    No Offline surface scan
supported.
                    Self-test supported.
                    No Conveyance Self-test
supported.
                    No Selective Self-test
supported.
SMART capabilities:            (0x0002)    Does not save SMART data before
                    entering power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging
supported.
Short self-test routine 
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      (   1) minutes.


SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH
TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1
Raw_Read_Error_Rate     0x0000   100   100   050    Old_age   Offline  
    -       0
  5
Reallocated_Sector_Ct   0x0002   100   100   050    Old_age   Always   
    -       6
  9
Power_On_Hours          0x0000   100   100   050    Old_age   Offline  
    -       96
 12
Power_Cycle_Count       0x0000   100   100   050    Old_age   Offline  
    -       1166
160
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       64
161
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       277
162
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       0
163
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       26
164
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       24279
165
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       18
166
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       1
167
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       11
168
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       3000
169
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       100
192 Power-Off_Retract_Count
0x0000   100   100   050    Old_age   Offline      -       363
194
Temperature_Celsius     0x0000   100   100   050    Old_age   Offline  
    -       28
195
Hardware_ECC_Recovered  0x0000   100   100   050    Old_age   Offline  
    -       100911
196 Reallocated_Event_Count
0x0000   100   100   050    Old_age   Offline      -       0
241
Total_LBAs_Written      0x0000   100   100   050    Old_age   Offline  
    -       29074
242
Total_LBAs_Read         0x0000   100   100   050    Old_age   Offline  
    -       43152
245
Unknown_Attribute       0x0000   100   100   050    Old_age   Offline  
    -       37824


SMART Error Log Version: 1
No Errors Logged

Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(ho
urs)  LBA_of_first_error
# 1  Short offline       Completed without
error       00%        50         -
# 2  Short offline       Completed without
error       00%        12         -
# 3  Extended offline    Completed without
error       00%         8         -
# 4  Short offline       Completed without
error       00%         8         -


Selective Self-tests/Logging not supported